Surface Finishing Equipment Co. Basni, Jodhpur, Rajasthan

  • Wet Shotcrete Machine

    Wet Shotcrete Machine

    Request for Price

    Surfex have developed Portable Wet Shotcrete Machine for spraying wet concrete of required W/C ratio.The wet concrete is poured into the vibratory hopper of the machine, which flows into the through-going chambers of rotor and moves to the discharge outlet with rotor running, where it is blown to whirl stream implement by compressed air leaded by air pipe. Hence it is blown by scattering, accelerating, whirling and floating vortex stream and through conveying hose to the nozzle, where the required volume of liquid accelerator is added.   The output of the machine is 5 cubic meters per hour and maximum horizontal conveying distance is 35 meter. The company has also developed dry Shotcrete and Guniting machine, refractory cement spraying machine etc. In wet process shotcreting a low slump concrete mix is conveyed pneumatically and sprayed through shotcrete nozzle.  The compressed air supply is  added from separate air compressor.  The maximum conveying distance for wet shotcrete is 10-15 meter vertically and 35 meter horizontally.

    ...more
    Get Best Price
  • wet blasting machine

    wet blasting machine

    Request for Price

    It is self-contain System which uses slurry of Abrasive Media & water to clean, descale and degrease surfaces in a single operation. The slurry is directed through a special high volume pump to blast gun where regulated air pressure adjusts the aggressiveness of the process. The process is free of dust and is close-loop. Water acts as a buffer between metal & media to cushion the shock on delicate components. This WET SHOT BLASTING MACHINE is recommended for degreasing & Blast Finishingof delicate jobs. In this method cabinet hopper contains the slurry of abrasive and liquid. The slurry is continuously agitated to ensure a through mining of the abrasive and the liquid. The slurry is drawn up by pump through flexible pipe to the nozzle of the blast gun. Where it is propelled by compressed air to increase the velocity. The stream of abrasive, suspended in a liquid is projected at high velocity through a gun. The fired slurry from nozzle gets collected into the hopper like bottom of blast cabinet. From where it is passed to slurry pump for recycling. The quantity of slurry to the blast nozzle can be controlled through the valve provided inside the blasting chamber. An arrangement with the help of washing gun will be provided for cleaning of job after micro wet blasting.

    ...more
    Get Best Price
  • TUMBLAST

    TUMBLAST

    Request for Price

    TUMBLAST WITH METALLIC BELT CONVEYOR In this Machine instead of Rubber Belt Conveyor a alloy metal Conveyor Chain is provided. This advantages of Chain Conveyor lies in loner life, better tumbling action, no sagging of coneyor, no frequent tightening of Conveyor of required. You need to replace only worn out Mettalic Strips (no need to replace whole Conveyor). This Machine is recommeded for cleaning of medium to heavy casting   ‘Surfex’ Airless Shot Blasting Tumblast Machine redefined with extra features with Steel Belt Conveyor Type Surfex Airless Shot Blasting Machine Tumblast Type, Model: RB 27×36with steel belt conveyor system, blast cabinet, bucket elevator, Fabric bag type dust collector, Abrasive cleaning system, Automatic abrasive flow control valve, Time clock, Abrasive storage tank, Blast wheel assembly complete unit with drive mechanism, inbuilt Soundabrator with under mentioned standard accessories.Work chamber/Cabinet : Work Chamber is having three fold layer construction.1. The main structure of machine is of prime quality plate 6-8-10 mm thick.2. The entire cabinet is lined with abrasion resistant rubber having thickness 6 mm.3. Extra thick additional Mn. Plate in direct blast zone.The Blast cabinet is fabricated from 6-8-10 mm thick heavy duty prime quality steel plates, supported by strong rolled structure welded construction and engineered suitably for strength and rigidity to guarantee the optimum sturdiness. This robust rolled structure with thick plate foundation holds stand the machine and helps to reduce vibration keep within permissible limits. The blast cabinet bottom is provided with mild steel perforated floor for protection against abrasion wear. In the standard machine cabinet is lined with highly abrasion resistant special grade rubber sheet having thickness 6 mm. The rubber sheet has special property to retard abrasion on account of rebouncing of abrasive. The direct blast zone of the cabinet is provided with 12 mm thick work hardening grade Mn. Steel circular liners (left and right). A horizontal / Vertical door isprovided having limit switch for safety purpose. Inside of door is fully lined with tyre grade rubber liner. The door is fitted with limit switch and lever type lock is provided for locking the door and preventing escape of abrasive.In case Mn. Steel Lining inside the cabinet (Optional accessory) is ordered then the entire cabinet is lined with long life Mn. Rolled steel sheet. Work Conveyor:The endless type perforated steel belt conveyor is provided. The gentle tumbling action of this conveyor exposes all the surfaces of the components to the blast stream. The tensioning arrangement of this conveyor belt is provided. The conveyor is driven by three number of roller through a chain drive system located outside the cabinet. The spent abrasive falls through perforation of the conveyor into the hopper of the cabinet which are guided to the boot of elevator for recirculation purpose.Wheelabrator Unit (Blast Wheel Assembly):One number of Blast Wheel station, Size 25RLM150 (15 ½ x 2 ½ ) with RADIALOCK MECHANISM are mounted on 20mm thick heavy duty prime quality steel plate and strategically around the cabinet and the pass line of the work. All blast wheels are arranged to blast at an angle with the line of job movement. The unit consists of fabricated steel casing having installation of different alloy steel liners, rotor, blades, control cage, impeller and feed spout. The rotor is made out of EN grade material duly hardened. The drive system of blast wheel (rotor) entails a set of self lubricated and self aligning pedestal bearings. The rotor is dynamically balanced. The drive shaft of blast wheel is made out of EN grade material and duly precision grinded to the finest accuracy. The fabricated casing of blast wheel assembly can be easily opened up through bolts/levers for examination of various liners and parts of wheel assembly. Individual ammeter is provided on control panel to indicate abrasive flow rate/loading of turbine in terms of current loading on ammeter. The abrasive media is centrifuged at a required tangential velocity by blast wheels having 8 Nos. of Moly and Chromium and various other alloy steel and hardened to 58-62 HRC value blades. The latest RLM design makes blade slide fitting type. The rotor, blades, control cage and impeller are shell casted to give even wear and tear during operation leading to vibration free performance of entire system.

    ...more
    Get Best Price
  • SWING TABLE MACHINE

    SWING TABLE MACHINE

    Request for Price

    SWING TABLE TYPEThe range of Surfex Swing Table Type Machine is made in such a way that it suits to small to big foundries. These machines can be supplied in one / two doors with table. The doors combination of Swing Table and drum is also available. The operation of machine is simple and automatic. Operating Principles :All four models are equipped with a hinged door, supporting a table having constant rotation speed. The machine is equipped with a high performance centrifugal blast wheel. The abrasives are thrown upon the work pieces kept on the table by this wheel. The spent abrasives are transferred by screw conveyor into boot of elevator. The elevator transfer abrasive into separator unit. The clean abrasives gravitate down into wheel for blasting purpose. An effective Dust Collector unit keeps the system clean of dust. Industry users include:Foundries, Forges, General Engineering Industries, Light-Alloys Foundries, Heat Treatment Shops, Plastic Industries.Typical Application include:De-sanding, De-scaling, Cleaning, De-rusting, preparation of surface for protective coating, shot peening of heavily stressed components, Etching and de-burring etc. Technical Specification for Swing Table Type Shot Blasting Machines :

    ...more
    Get Best Price
  • suction blaster

    suction blaster

    Request for Price

    Suction Blaster is the simplest and most effective way to remove corrosion and old paint. Suction Blaster is a clean, dust free sand blaster that leaves the surface cleaned and well prepared for painting, filling etc. When the cabinet and power module are correctly set-up, the cabinet is ready for operation by actuation of the foot pedal. Fully depressing the foot pedal causes air to flow through the blast gun. Air moving through the gun draws media into the blast gun mixing chamber. The media mixes with the air and is propelled out the nozzle. After striking the object being blasted, the blast media, along with fines, dust, and byproducts generated by blasting, fall through the grate into the cabinet hopper. These particles are drawn into the reclaimer for separation. Dust and fines are first separated from the reusable blast media. Next the media is screened of oversize particles, and returned to the reclaimer hopper for reuse. Dust and fines are drawn from the reclaimer into the dust collector which traps the dust, discharging clean air. When the foot pedal is released the blasting stops.

    ...more
    Get Best Price
  • strip cleaning machine

    strip cleaning machine

    Request for Price

    STRIP CLEANING MACHINE Strip cleaning machine are used for stainless steel,descaling of carbon steels. This machine consist of multiple centrifugal blast wheels each of them driven by individual motors to give a through cleaning. The jobs kept on suitable conveying system with variable speed flexibility. The jobs enters the blast cabinet for cleaning from abrasives fired by multiwheels for homogenous finish.   Operation:The strip is fed from de-coiler to inward side of tunnel /vestibule of pinch rollers of shot blasting machine. Then the strip enters into blasting chamber for blasting operation/purpose.8 no of blast wheel stations are located strategically on to blasting cabinet.(i.e 4 wheels are located on top of blasting cabinet and 4 wheels are located on to bottom portion of blasting cabinet) .the blasted /cleaned strip moves forward and enter into out let tunnel/ vestibule. From there strip is pulled by coiler and other equipment (arranged by customer).The machine is designed for cleaning strip @ 60 mtr per minutes. Operating Principle :The machine entails robust and sturdy Blast Cabinet on which 8 Nos. of Blast Wheel Station are located at descaling angle. The cabinet is also equipped with Abrasive Recovery & Cleaning System and Dust Collector for ventilating Blast Cabinet. The strip is fed from decoiler to inward side of tunnel through pinch roller of Shot Blasting Machine. The strips enters into Blasting Chamber for Blast cleaning application. 8 Nos. of Blast Wheel Stations cleans the strips from both sides in single pass. The strip is pulled by Coiler and other equipment and adjustable as per requirement. Maximum Coil Strip is of 60 mtrs. per minute can be achieved. The entire operation of machine is meticulously controlled by PLC.

    ...more
    Get Best Price
  • stone texturing machine

    stone texturing machine

    Request for Price

    STONE TEXTURING MACHINE   Surface Finishing Equipment Company has introduced Stone Finishing cum Texturing Machinebased on latest Italian Technology. The Machine houses multiple Blast Wheel Stations for throwing Shots on the Stone Slab to be finished / textured. These Wheels are specially designed for Stone Finishing application. The Stone Slabs are moved on Special Conveyor of the Machine. This conveyor carry’s Stone Slabs into work cabinet for processing Stone Slabs. The desired Texture / Finishing can be obtained by varying speed of Conveyor / speed of Blast Wheel / size of Shots etc. Specially designed blanks can be used on Stone to obtain special effect on the surface of the Stone. These Machine can be inlined integrated with various other Stone Treatment Processes like heating / cleaning of Stone as per the clients requirement. The loading and unloading system for Stone Slab can also be integrated with Machine as per customer requirement

    ...more
    Get Best Price
  • Standard Shot Peening Machine

    Standard Shot Peening Machine

    Request for Price

    Shot Peening Machine houses Special Blast Wheel Unit developed for Peening Application which throw shots on component to be peened. Quantity of Shots, Direction & Velocity of Shots and size distribution of Shots can be controlled by providing various accessories. Shots of higher hardness (having hardness 2 HRC above the hardness of component) is used. We are largest manufacturers of automatic shot peening machines in india and also export to countries like sri lanka, dubai, eqypt, mexico.

    ...more
    Get Best Price
  • Standard Pressure Blaster

    Standard Pressure Blaster

    Request for Price

    Operating Principle:-This machine is generally a cabinet type, manually handled air operated machine. In this machine component is placed in side the cabinet. One nozzle is provided for blasting purpose; operator put its hand in the Hand gloves section and used the gun/nozzle to blast clean the component. In this system optional track extension system along with manual turn table can also be incorporated.

    ...more
    Get Best Price
  • Pneumatic Guniting Machine

    Pneumatic Guniting Machine

    Request for Price

    application for our guniting & shotcrete machines is mainly on undermentioned applications: 1.        concrete repair (bridge repair, infrastructure repair, etc)2.        rockscapes3.        artificial rocks4.        retaining walls5.        panel building systems6.        zoos7.        slope stabilization8.        refractory spraying9.        concrete domes10.       mine and tunnel support and walls11.       swimming pools12.       straw bale construction13.       water parks14.       skateboard parks15.       repairing and rebuilding civil structures.16.       water proofing etc. 1. Roter type shotcrete machine : the machine works on a dry mix principle. The material is duly filled into the feeding hopper from where it falls into the chamber of revolving rotor. The mix is then transported in a continuous process to the air chamber, from there it is blown by the compressed air stream through the hose to the spraying nozzle, and to the application area respectively. Water is added to the dry concrete in the nozzle at the end of the conveying hose pipe. The machine is driven by electric motor.

    ...more
    Get Best Price
  • Shotcrete and Guniting Machines

    Shotcrete and Guniting Machines

    Request for Price

    Material : matel

    Get Best Price
  • shot peening machine

    shot peening machine

    400,000 Per Piece

    Automatic Grade : Automatic

    Power : 220 V

    Get Best Price
  • Semi Down Draft Type Spray Booth

    Semi Down Draft Type Spray Booth

    Request for Price

    Material : matel

    Get Best Price
  • Semi Down Draft Spray Booth

    Semi Down Draft Spray Booth

    Request for Price

    Operating Principles The Semi down draft type paint spray booth is suitable for any type of Air-less and Electrostatic painting. The system consists of painting booth enclosure, air intake filter, Filter channels for paint trap, air exhaust system, complete with electric motor, outlet duct, canopy etc. The fresh air enters into the system from the top of the booth passing through 2 stage filters. This allows air to flow vertically downward thereby washing the operator and the job for better visibility to the operator. Simultaneously the exhaust air system sucks the suspended paint particles and fumes from the booth. These suspended paint particles gets trapped in the filter channels which are provided on the bottom side of the wall.

    ...more
    Get Best Price
  • Screw Conveyor Blast Room

    Screw Conveyor Blast Room

    Request for Price

    Blast Room – The job is placed inside the blast room and the blasting operation is carried out by operator manually. Used abrasive falls down into the screw conveyor unit from where it is conveyed by longitudinal screw conveyors to cross screw conveyor. The cross screw conveyor conveys the abrasive media into boot of bucket elevator. The bucket elevator lifts the media and pours into media separation unit from where the reusable abrasive goes into the Portable Abrasive Blaster and Abrasive is recycled through blast nozzle. The unusable abrasive from the media separator unit is collected in an external bin The dust and fines from room is sucked and is carried into the fabric bag Dust Collectorand clean air is discharged into atmosphere, keeping the environment clean and friendly.

    ...more
    Get Best Price
  • Rotor Coils Honing Machine

    Rotor Coils Honing Machine

    Request for Price

    surface finishing equipment co. Have developed, designed & patented abrasive blasting / honing machine for rotor coil. The machine consist of loading conveyor stand rubber belt conveyor, inlet & outlet conveyor zinc, chromium coated rollers. The rotor coilsare kept on loading conveyor stand from there. It is auto transferred to inlet conveyor of the machine. The inlet conveyor carries the rotor coils into belt sander chamber for removing heat scales etc. From there, coils traverse into 6 set of blasting cabinet having 20 blast nozzles for thorough blast cleaning & finishing of rotor coils from all the sides in single pass. after shot blasting, the rotor coils is air blow cleaned and transferred to outlet of conveyor from where they are auto lifted and transferred on unloading belt conveyor stand. All blast chambers are ventilated and have abrasive circulation & cleaning system. The entire operation of the machine is meticulously plc programmed.

    ...more
    Get Best Price
  • rotary barrel type machine

    rotary barrel type machine

    Request for Price

    Get Best Price
  • Rotary Barrel

    Rotary Barrel

    Request for Price

    Rotary Barrel TypeSend EnquiryRotary Barrel Type Sand Blasting Machine designed for Sand Blast Cleaning of small or medium size iron, steel, alloy and non-ferrous castings, forgings, heat treated parts, pressings and Fabrications at the lowest possible cost. Capacity :100/150 kgs load 1.5/3 cft effective volume. The cleaning rate depends on nature of job, degree of surface preparation required and type of abrasive used. Blast Wheel :The most effective abrasive throwing unit fitted capable of projecting optimum quantity of abrasive per horse power. Low Maintainence :Rugged and sturdy overall construction of machine ensure minimum operational and maintenance cost, where vulnerable components are lined with wear resistant materials. Desgin :Through tumbling action of the barrel and slow speed rotation of barrel, the protection of delicate casting is ensured. Controls :All controls are centrally located on the machine itself. All necessary safety features are provided. Timer :The machine can be pre-set for blasting cycle by Electronic Timer.

    ...more
    Get Best Price
  • Roll Etching Machine

    Roll Etching Machine

    Request for Price

    Get Best Price
  • Rod Shot Peening Machine

    Rod Shot Peening Machine

    Request for Price

    This machine, is continuously operating type, in which Rods are fed through diabola into machine. The rotating rods are shot peened to required intensity and come out from outlet portion. All shot peening parameters are monitoredin the machine to achieve desired results. Machine is equipped with Shot Classifier, Shot Velocity Controller, Shot Quantity Controller, Shot Direction Controller etc.

    ...more
    Get Best Price
  • Robotic Shot Peening Machine

    Robotic Shot Peening Machine

    Request for Price

    surfex robotic shot peening machines with following features:the shot peening process is based on the effect of introducing compressive stresses in the surface of a metal part by controlled impinging with spherical particles. By this the resistance against fatigue will be increased and therefore also the life of a part.in the space and aircraft-industries the advantages of the shot peening process are already known: the increase of the fatigue-life of critical parts without weight increase. The designers who used shot peening in applications where the effects of fatigue were caused by grinding, electrical discharge- and electrochemical-machining (edm and ecm), electroplating, anodising, thermal spraying and welding. It also can help increase resistance to fretting, galling, caviation erosion, stress-corrosion cracking, intergranulair corrosion and hydrogen-embrittlement.   we are specializes in the general blast technologies for cleaning, roughening and activating surfaces. This way we were able to encounter demands of the industry in the for the shot peening process. to control the shoot peening process, one needs the very precision of the shot peening parameters. Surfex started with the development of precise controlled parameters: • shotsize• shot material and shot shape• shot velocity and shot flowrate• aiming of the nozzles (distance and angle)• shot peening time these parameters determine the intensity (indication for compressive stress) and the coverage (indication for effectively impinging the complete surface). surfex shows its capability to precisely control, monitor and record the critical shot peening parameters.

    ...more
    Get Best Price
  • Refractory Gunning Machine

    Refractory Gunning Machine

    Request for Price

    The machine contains standard accessories like hose pipe with end connection, hot gunning nozzle, nozzle body, remote control system, Vibrating Silo, water ring & Pop-up valve ring. Surfex Refractory Guniting Machine Model D-6(R) Conversion with Pneumatic Drive as per our standard specification. Surfex Refractory Guniting Machine Model D-3(R) Conversion with Pneumatic Drive as per our standard specification. Surfex Refractory Guniting Machine Model S-6(R) with Pneumatic Drive as per our standard specification.   Surfex Refractory Lining Machine Model R-1 Complete with material hopper, Rotor feeding mechanism, electric motor, (10 HP) with starter, material hose pipe (length 15 mtr.) along with nozzle, water regulating valve etc. Output: 5 to 7M3/Hour. Surfex Refractory Lining Machine Model R-1 operates according to dry mix delivery principle. The dry mix flows from filling hopper into the continuously revolving Rotor chambers through the air chamber and finally into the compressed air stream. The air stream carries the mix to the spray nozzle (Hot gunning lance) through delivery pipe. The water is added just before the junction of hot funning lance and delivery pipe. The rotor chambers are powered by electric motor. The machine is recommended for hot / cold repairing of furnace, ladles, cupola, convertor, coke batteries etc.

    ...more
    Get Best Price
  • portable abrasive blaster

    portable abrasive blaster

    Request for Price

    The portable abrasive blaster are safe, high productivity systems designed for use with a wide range of abrasive media. The operation is performed on metals, glass, ceramics, plastic and stone.The machine works on pressure blasting principle, consist of a blast generator. The abrasives are filled at the top of machine when machine is not working and blast generator is not pressurized. At the top, a vibrating sieve is provided to sieve the abrasive filled. The oversize abrasive and debris are retained on the screen, thus prevent the choking of blast line. When mushroom valve is opened the abrasive will get transferred to blast generator for blasting. The mushroom valve gets closed when compressed air is switched on and abrasive storage tank gets pressurized, for free fall of abrasive into the mixing tube. From mixing tube the abrasive is carried away by compressed air to the nozzle for blasting. The Blast Generator is fabricated from MS Steel plate of thickness not less than 6 mm as per IS-2825 and hydraulically tested for 250 psi.

    ...more
    Get Best Price
  • pneumatic special purpose machine

    pneumatic special purpose machine

    Request for Price

    the machine is fully automatic rotary continuous satellite table air operated blast machine consist of cabinet enclosure, rotary turntable having 12 rotary satellites, suction blast gun in 2 group, one automatic blow off gun, abrasive reclaimer separator, cartridge type dust collector and plc operated control panel. This machine is suitable for automatic shot blasting of small size component like fan body etc. The blast chamber is having one front vision window and top of chamber will have air louvers and lighting arrangement and one side door with vision window and hand holes with rubber sheet for cleaning & inspection & maintenance purpose. The blast cabinet is duly lined with wear resistant rubber liner.   the 12 satellite tables are placed with 60 degree to each other and they are free to rotate. The satellite table are provided with special fixture to hold component to be blasted. The rotary turntable is driven by gear box and electric motor and have indexing arrangement. 2 satellite tables are simultaneously engaged for blasting purpose, each satellite table is provided with 4 nos. Of reciprocating guns. The reciprocation is provided in such a way to cover entire piece for providing homogenous and uniform finish. The satellite table inside blast chamber is revolved at fixed rpm through vfd drive. After blasting of component, satellite table come out at operator’s position outlet of blast chamber. the next satellite tables move inside the blast chamber and the satellite table having blasted component are unloaded and new components are loaded, hence operation of machine is continuous. The machine is provided with media recycling system for continuous operation. The media is continuously air washed and sieved so that impurities and foreign particles etc. Are removed from the system. The usable abrasive are transfered into storage tank from tank and the abrasive are transferred through induction-suction recycling purpose. The entire blast chamber is ventilated by cartridge type dust collector which maintain emission level of air as cbpc norms. A control panel is provided with plc feature for fully automatic operation. The machine is provided with all safety features.

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers
  • Year of Establishment 1979
  • No. of Employees Below 20
  • Annual Turnover Below Rs. 0.5 Crore Approx.

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Established in year 1979, Surface Finishing Equipment Co. is Retailer of almen guage, almen holder, Almen Strip, Dust Collectors, hanger type machine, lpg clyinder, Plate Cleaning Machine, Pneumatic Equipment, rod cleaning machine, Roll Etching Machine from Jodhpur, Rajasthan.
Read More »

Contact Information

Surface Finishing Equipment Co.

  • Mr. K. K. Modi
  • E-100, Marudhar Industrial Area, Phase Ii, Basni, Jodhpur, Rajasthan
top