Space Age Security Systems Ltd. Kamla Nagar, Delhi

  • Ultrasonic Detector

    Ultrasonic Detector

    Request for Price

    Ultrasonic motion detectors generate inaudible sound waves/patterns and recognize a disturbance in those patterns caused by an intruder. These are compact devices which make the installation simple. The ultrasonic transmitter transmits high frequency, inaudible sound waves into the protected area and the receiver picks up the energy reflected back to the unit by the walls, ceiling, floors and other fixed objects in the enclosed area. The received signal is processed and analyzed by the signal processor. An intruder moving into the protected area causes some waves to be reflected resulting in change of pattern and hence change in strength of signal received by Receiver. If there is no movement within the area of coverage, the signal strength remains unchanged. These changes causes the unit to detect the movement and sound the alarm. While both ultrasonic and microwave use the same principle to detect motion, a microwave uses a much higher frequency and as a result it can detect motion through most walls & partitions. Motion Sensors generate signals in the range between 19 and 40 kilo hertz which is above the frequencies that a normal ear can hear. Ultrasonic energy is contained completely in the area it is operating. It will not penetrate walls or windows but is absorbed by carpet, curtains and false ceiling. Obstructions within a room will reflect the ultrasonic energy and distort its shape pattern. Typical detection range of ultrasonic units is 20 feet wide by 30 feet long in a room with a ceiling up to 12 feet high. Ultrasonic detectors can be prone to false alarms due to excessive air currents and other extraneous ultrasonic noises. Proper application and installation of this equipment is very important. The ultrasonic units can be mounted on any plane, vertical or horizontal or in any location - ceilings, walls, corridors - projecting the ultrasonic pattern at any desired angle. These units provide volumetric space protection.

    ...more
    Get Best Price
  • Server Monitoring system

    Server Monitoring system

    Request for Price

    04 independent Channels for real time Temperatures Monitoring 01 Channel for Humidity Monitoring 02 Channels of volt free inputs can be taken by the system so that sensors such as Raw Power, UPS Power (Single / Three Phases), Smoke, Flood, Motion, Room Entry etc. Alerts sent via SMS using GSM modem. E-mail Alert through GPRS or TCPIP (Optional) RS-232 port to connect PC/Laptop for downloading data Threshold user denable for each sensors LCD display and scroll option to view data on unit LED indications. Threshold can be congured on Panel as well as through RS 232 (software provided) SMS request to know the current sensors status – No need to visit site or open PC Event or Sensors log history can be recorded and view on Panel as well as on PC/Laptop Audio alert through Buzzer as well as on Hooter Hooter can be mounted remotely (wired) for effective monitoring & Audio Alarm System works independently. No host PC or existing IT infrastructure is required Doesn't matter whether you are in ofce or out of station, you can monitor your data center any time. Input power supply 220V and 50Hz User friendly operations and easy installation. Device can be used in many other applications such as Bank ATM, Laboratories, HUB Room, Cold Storage, Warehouse, Poultry Farms, and Hospitals etc. . .

    ...more
    Get Best Price
  • Rack Temperature Logger

    Rack Temperature Logger

    Request for Price

    The system is used to monitor environment for each rack or at Data Center level to pre-empt any problems that may arise due to variance in parameters like temperature, humidity, voltages, door open etc. Instead of Administrator going to each rack to collect the data, the same is consolidated by the system on a central server and presented in a Live Dashboard format. The system is intelligent enough to monitor the parameters and also inform relevant people thru SMS when such an eventuality happens. The system consists of three parts: Monitoring Hardware – A 19/21" rack mountable system that comes with all the sensors and intelligent Firmware with TCP/IP connectivity. Server Software – This consolidates information from almost unlimited number of 'Monitoring Hardware' at remote locations and present the same in a user friendly format. Intimation solution – This consists of a modem and software that sends SMS to relevant people whenever an event occurs   Optional: User can select number of sensors as there may not be need to monitor one or more inputs We can also use GPRS with a modem to connect different sites instead of TCP/IP

    ...more
    Get Best Price
  • Rack Temperature Alarm

    Rack Temperature Alarm

    Request for Price

    Spaceage is a leading manufacturer of Security and Safety Solutions, especially for Telecom and Networking Domains. Spaceage has more than 6,000 Fire Panels and 11,000 Aviation Obstruction Lights deployed across the country. Spaceage has an enviable list of esteemed clients, each of whom is repeat customers. "Spaceage" has variety of Networking, Rack Accessories for Power Management and Monitoring of the Racks. All the accessories mentioned herein have been developed by us including Hardware Design, Firmware, Sheet Metal, PCB, and Powder Coating etc. This gives us the flexibility to change any of our products as per your requirements. The details of our products are as under:   RACK MONITORING SOLUTIONS: Remote Monitoring System using GSM or TCP/IP: This system monitors various parameters of a remote site and communicates the same to a central location using GSM (SMS) or TCP/IP. By using this system it is possible to monitor hundreds of sites at a central location without the need of manning the remote site. It is a common problem that many times due to Air Conditioning failure, mains failure etc the sites could fail. By the time the network administrator knows the problem, the site is already down. Our system can be used to monitor various parameters as and when they happen. By using GSM technology it is possible to have an alternate route to communicate the information from the site to the central location. This is advantageous for critical sites because if while using TCP/IP, the main router/network equipment at a site goes down then there is no way to get information from the site. The types of parameters that can be monitored are: Electrical Mains. Generator On-Off. Battery Voltage. UPS On-Off. Temperature High or Low. Humidity High. Intrusion/Door Open.

    ...more
    Get Best Price
  • Power Distribution Unit

    Power Distribution Unit

    Request for Price

    When using a normal PDU, it is possible that a short circuit in one device can shut down the complete rack or even the data center. This is not acceptable in critical applications  Also in shared data centers, there is a requirement to measure power consumption by individual server/router connected to each socket in the rack for the purpose of billing etc. Each socket on PDU is metered. If the equipment consumes more power than specified for the socket then the individual socket only is switched-off automatically. The voltage, amperes and KVA is displayed for each individual socket on a 2 Line 40 character in built display An MCB is provided to protect overloading for complete PDU. 5 Nos IEC sockets, (5 Amp.) and 2 normal sockets (Type D, 5 Amp.) are provided. Software for managing PDU through TCP/IP provided.

    ...more
    Get Best Price
  • MOBILE STARTER SYSTEM

    MOBILE STARTER SYSTEM

    Request for Price

    Send SMS to START/STOP motor (or any other electric equipment). Can be used with Water pumps, Industrial motors, AC, DG etc. System sends SMS back if input Voltage less (Single/Three phase). Get status of motor/appliance through SMS. If Motor/equipment fails, then system sends SMS. Electricity failure/resumption SMS during motor/device operation. Automatic ON after power failure. Motor ON duration SMS. Can be controlled ONLY by authorized personnel – up to 4 users. System can't be reprogrammed in case of theft of system. Easy installation – can be done by user himself. Motor ON warning buzzer. 2x1.2AH Battery used for Power Back-up. Robust construction for dusty/humid environments. Saves manpower. 

    ...more
    Get Best Price
  • Microwave Detectors

    Microwave Detectors

    Request for Price

    These detectors use high frequency radio waves (micro waves) to detect movement. The micro wave energy will penetrate and pass through all building construction materials like wood, sheet rock, cinder block, plastic, glass and brick and is reflected by metal. Because microwave energy will penetrate, application and installation requires careful consideration. Microwave has much greater range than ultrasonic. Basically, such a detector emits high frequency waves that form a pattern after getting reflected or absorbed by different objects in the vicinity. If there is any movement in the vicinity then the pattern changes and the same is then used for Receiver unit to detect the intrusion. The Receiver, in turn gives input to the control panel to trigger the alarm.

    ...more
    Get Best Price
  • lightening arrester

    lightening arrester

    Request for Price

    Spaceage manufactures simple and most effective lightening arresters incorporating the various findings from different studies. It is an established fact that for lightening arresters has to be effective, the surge produced by lightening should be earthed using a joint less conductor. That's why the copper strip/cable that is brought from the lightening arrester does not have joints. The joints are braised so that a good permanent electrical contact is established. But somehow many people overlook the fact that in some of the lightening arresters in the market, there are three joints. This is true for a typical 5 spike model that has a joint where the spike is screwed into the central dome, which in turn is screwed on to the central rod/pipe, which in turn is screwed to the base. These three joints will kill the effectiveness of the Lightening arrester. Spaceage's arrester is a single rod that has a spike at one end and has an insulation arrangement at the other for mounting. No joints. In fact, most of the internationally available lightening arresters also have the same principle. And importantly, Spaceage arrester would typically cost one third as compared to other ineffective models.

    ...more
    Get Best Price
  • LED Based Aviation Obstruction Light

    LED Based Aviation Obstruction Light

    Request for Price

    We are offering led based aviation obstruction light. Spaceage is the pioneer in uniform intensity led based aviation lights as per icao standards. We offer 24v dc48v dc230v ac, 10cd33cd lights (type a type b) lights with or without lightphoto sensorsswitch. We offer internalexternal smpssensor.

    ...more
    Get Best Price
  • Led Aviation Light

    Led Aviation Light

    Request for Price

    We FULLY meet the ICAO specifications We provide uniform intensity all around as opposed to most lights in market that meet ICAO mandated requirements at certain angles only. More than 24,000 of our lights are being used around India with repeat orders from every customer     The model consists of TWO lights that are connected to a single 48V DC input. The Light sensor is single. Both the lights switch ON and OFF at the same time. The SMPS is in-built inside the light base.   TWIN DOME 230V AC Model (SSSL-04TAC) The model consists of TWO lights that are connected to a single SMPS that is mounted in the shelter. The Light sensor is also connected to the SMPS outside the shelter. Both the lights switch ON and OFF at the same time. Features of each light are:

    ...more
    Get Best Price
  • GSM UPS SYSTEM

    GSM UPS SYSTEM

    Request for Price

    Almost every large UPS user has faced a situation where the UPS has shut down without warning leading to failure of critical equipment. This becomes specially critical in during unmanned hours. We have developed a system that can send SMS / E-mail in case Mains Fail. Mains Resume. UPS Fail. UPS Resume.

    ...more
    Get Best Price
  • glass break detector

    glass break detector

    Request for Price

    The glass break sensor senses the noise produced by the breaking of glass or when Glass is hit by a metallic object. The cracking noise made as glass is broken contains higher frequencies in addition to the audible sound. In a well designed glass breaking sensor, only the energy produced at such specific frequencies is used for triggering an alarm and in this way false alarms from normal sounds are ignored by the alarm triggering circuit. Improved version uses advanced digital filtering technique to completely reject background noises below the cut-out frequency and advanced signal processing to detect fast attack signals, yet ignoring sounds that build up gradually with time such as approaching automobiles, aircraft or screeching brakes. This type of glass break detector has a detection range within 50' radius and therefore can cover more than one glass window as long as it is within range. The optimal mounting location for these detectors is in a corner approximately 1 inch from the widow frame. The reason for this is that the shock waves tend to concentrate in the corners of the window.

    ...more
    Get Best Price
  • Fire Panel

    Fire Panel

    Request for Price

    Spaceage manufactures Fire Alarm Panels for BTS shelters with one/two Smoke/Fire sensors, Temperature sensor, Intrusion sensor (Door Switch), Internal/External hooter, MCP, Reset switch etc. Advanced models also have LCD display, Digital Access code and programmable delays.  

    ...more
    Get Best Price
  • Fire Alarm Panel

    Fire Alarm Panel

    Request for Price

    For Enclosures, specially unmanned, the following parameters need to be monitored to ensure safety of the equipment in the enclosure. Our system monitors and intimates on the NMS: if there is smoke inside the shelter if the temperature inside the shelter goes beyond a limit (indicating Power/AC failure or even a Fire) if someone has opened the door of the shelter and is not authorized to do so These conditions, if unchecked can compromise the security of lacs worth of equipment in the shelter and more importantly will lead to break in service and hence dissatisfied customers. Keeping the above in mind, we have developed a comprehensive solution that incorporates all the features in a single box that operates on 48V DC.   Our Fire Panel (Advanced Model) has following features: Central Control Panel Intrusion detection Smoke detection Temperature rise detection Whenever a zone is activated through its sensor, the following outputs are there Corresponding zone LED lights up on Central Panel Relevant message appears on LCD Display In-built Buzzer sounds NMS compatible NO/NC output is also activated In case of Fire additionally a hooter also sounds. This hooter can be mounted outside the shelter Rugged industrial design, suitable for rough usage Temperature Alarm/Sensor features: Continuous monitoring of temperature using an external temperature sensor If the temperature in BTS shelter goes beyond the User defined temperature cut-off then the Temperature LED lights up on the central panel and Buzzer starts sounding. Also, the NMS is activated. Once the temperature goes back to normal, the LED, Buzzer and NMS are reset automatically. The display will indicate 'System Normal' The cut-off temperature can be modified by jumper setting Fire Detection: Fire detection is done using a standard Smoke Sensor that is interfaced with the Central Panel. The Smoke Sensor comes with blinking LED to indicate the status of the sensor The Smoke sensor draws it's power from central panel In case of fire, the Fire LED lights up on the central panel and buzzer sounds. Also, the NMS is activated. In case of Fire, additionally, a hooter also sounds. This hooter can be mounted outside the shelter In case the wiring of Smoke sensor is Open or Short then corresponding LED lights up and buzzer sounds. The LCD display also displays the OPEN/SHORT message. RESET button is provided for resetting Fire indication. Intrusion Detection with Entry/Exit Delay: Intrusion is detected using a magnetic switch that has to be mounted on the door of the enclosure. There is provision for Entry and Exit delay so that user can deactivate the alarm before the NMS starts When the door is opened, the Door LED lights up on the central panel and Buzzer starts sounding. Also, the NMS is activated. The user has to enter the 4 digit Password to deactivate the buzzer and NMS. While leaving the enclosure, the user has to again enter the 4 digit Password to activate the Intrusion detection function The exit time is as determined by the jumper setting Entry Code: Four digit Code has to be entered on the keypad provided to detect authorized entry. This is factory preset to 1234. User can change the password of each panel by going into programming mode without the need to open the panel. Specifications: Following are the specifications of this Fire Alarm Panel:- Fire Zone : One Fire Sensor : Optical Type Sensor, 1 No. (Provision for second Sensor too) Door Sensor : Magnetic Door Sensor, 1 No. Temperature Sensor : RTD or Thermistor Sensor, 1 No. Entry delay, suitable using jumpers but displayed on LCD Exit delay, set table using jumpers but displayed on LCD Hooter max time limit Controls: LCD display to display various error message Separate switch to indicate selected settings Jumper based settings Front panel control: Reset switch for fire alarm

    ...more
    Get Best Price
  • Electric Panels

    Electric Panels

    Request for Price

    ADVANTAGES: Get real time automatic SMS for: 4 Temperature Zones Humidity Raw Power etc. Smoke Sensor UPS Power User defined cut-off for all parameters. Automatic SMS to 4 phone numbers followed by rings and LED, Buzzer / Hooter (up to 25 meter) incase user defined limits are crossed. E-mail alerts through TCP-IP or independent GPRS. Alarm message reaches you anywhere in the world even if your LAN is down. Log file for up to 1500 alarms. Additional 1500 log for time interval based actual parameters. Windows based software provided to download events through RS232 port (Date and time based reports available).     For more details .. Guard Tour Monitor Gates and Barriers Security Lights Photosensitive Lights Metal detectors X-ray Machines

    ...more
    Get Best Price
  • Disarming System

    Disarming System

    Request for Price

    Arming in a loose sense is switching on the system and disarming is disabling (switching off) the system. These functions can be performed using a simple switch or by using a keypad in which the user is supposed to enter a password. In advanced systems, this may be done by an (Radio Frequency) RF remote or an Infrared remote. In cost effective systems, this is done using a traditional key that operates an electric switch. Such key-based systems are convenient for use by all age groups and offers more flexibility in terms of increasing number of authorised users. Some of the systems also have a keypad in which the owner is supposed to enter the correct password to do any arming/disarming. The infrared remote requires that the operator of remote be in visual line of sight of the receiver that is on the control panel, where as the Radio Frequency remote can operate the control panel from anywhere (as long as the receiver is in the range) In addition to arming / disarming the control can support many other functions which may not be available (or even desired) in every control panel.

    ...more
    Get Best Price
  • Dc Energy Meter

    Dc Energy Meter

    Request for Price

    Our 4 Channel DC Energy Meter comes with options of Shunt, Hall Effect Sensor, Split Core Hall Effect Sensor. Display Information displayed using LCD with back light Information displayed by automatic scrolling or manual scrolling   Communication The DC EM communicates with other devices on a 2-wire optically isolated RS-485 link and uses the Mod bus RTU slave protocol. Mounting Wall mounted, mounting fixture provided. Optionally rack mounting can also be provided.   Data Storage and Display Capability Daily day energy consumption of last four months is stored on memory. Monthly consumption data for last 12 months. Information can be accessed on the LCD display locally User can directly view results of a specific month instead of scrolling through sequentially all the data. Password Protections First Password for entering into Coughing mode. Configuration password can be modified in the field. Second password to reset Configuration mode password, if user has forgotten the same. Third password to reset memory data. Settings under Config mode Allows following settings to be changed in a user friendly manner: Slave ID Date, protection against invalid date Time, protection against invalid time History view Memory reset Password reset

    ...more
    Get Best Price
  • Battery Monitoring System

    Battery Monitoring System

    Request for Price

    It is usually seen that out of the 24 or 12 batteries that make a battery bank, one or more batteries may become faulty. Due to fault in one battery out of a total of 24, the performance of the complete battery bank reduces and in many cases lead to reduced backup and insufficient charging of all the batteries. Our monitoring system offers the following salient features to overcome this problem: Can monitor up to 24 individual batteries online. Monitoring is done for voltage on 24 x 7 basis. User can define low voltage level for individual batteries. If any of the battery voltage falls below the user defined limit then the system takes the following actions: Display the faulty battery no. on the display. Send an SMS to the user defined no./s (up to 4) Activate NO/NC contact which can be monitored through NMS. Battery low message is not repeated for the same battery. List of all batteries that are below the user defined limit are mentioned in same SMS System can work on 20V DC - 55V DC By continuously monitoring the old battery banks you can identify the specific battery that needs replacement instead of stressing the whole battery bank.

    ...more
    Get Best Price
  • Aviation Obstruction Light

    Aviation Obstruction Light

    Request for Price

    Spaceage is the pioneer in uniform intensity LED based Aviation Lights as per ICAO standards. We offer 24V DC/48V DC/230V AC, 10cd/33cd lights (Type A / Type B) lights with or without light/photo sensors/switch. We offer internal/external SMPS/Sensor.  LED Aviation Obstruction Light/Lamp Our distinguishing features are: We FULLY meet the ICAO specifications We provide uniform intensity all around as opposed to most lights in market that meet ICAO mandated requirements at certain angles only. We can produce product as per tender / specifications and save costs. Range of Models We have many versions of Aviation Lights to suit every need. We offer following broad categories Voltage – 24V DC/48V DC/230V AC Sensor – Internal or External Light intensity – Low intensity Type A or Type B (for stationary low height objects) SMPS – External/Internal, Outdoor Bird Spike – With or without General features Each light consists of 135/162 (depends upon model desired) Surface mounted High Powered LEDs sourced from reliable and reputed sources. The LED's are mounted on special base that places the LEDs in absolutely uniform arrangement (as demonstrated in subsequent pages). Such an arrangement requires no additional lens or filter is to give UNIFORM light intensity. This also reduces any losses that are usually associated with lens etc. This is a UNIQUE arrangement devised by us. Body is made from Aluminium with bright orange powder coating or as per specs Totally sealed from moisture and dust. Silicon based permanent seals are used that are durable and absorbs the expansion of material in hot weather. Confirms to ICAO Annexure 14, for low intensity Type B obstruction light The light produced by LED's is RED in color and no additional color filters/Lens are required. (The filters / lens absorb part of light and fade after some time) Since the light produced by LED is directional in nature there are no reflectors or obstructions to reduce the dissipation of light. Our External SMPS model has option to bypass external sensor so that in case there is a problem with sensor, it can just be bypassed by flick of a switch. This gives enough time for operations staff to change the light, as and when convenient.

    ...more
    Get Best Price
  • Alarm Multiplexer

    Alarm Multiplexer

    Request for Price

    In recent times many telecom infrastructure companies are offering common passive infrastructure to more than one cellular operators. This decreases the cost of capital and maintenance. However, this introduces a problem in case the alarms generated inside the shelter are to be monitored by more than one cellular company. To tackle this problem we have developed an Alarm Extender that extends one alarm to multiple NMS, each one being electrically isolated. Since the outputs are isolated, even if there is a problem it remains limited to only one operator. Also even if NMS are incompatible (some work on -5 Volt DC, some work on 3.5 Volt DC) the alarm system can handle the same. This system was successfully used for underground stations of Delhi Metro where multiple operators are sharing the same infrastructure. Please note that a separate power source gives supply to this system and it does not effect any of the existing systems and can be connected to existing alarms without any modification.    Models : 4 Inputs, 8 Outputs. 4 Inputs, 16 Outputs. 8 Inputs, 28 Outputs. 6 Inputs, 64 Outputs. 18 Inputs, 72 Outputs.

    ...more
    Get Best Price
  • 48v dc aviation lamp

    48v dc aviation lamp

    Request for Price

    Get Best Price
  • Twin Aviation Obstruction Lights

    Twin Aviation Obstruction Lights

    Request for Price

    Twin aviation obstruction lights are connected to a single control panel. The control panel ensure that when the first light fails to switch on (or consumes less than 75% of rated current) then the standby light is switched on.

    ...more
    Get Best Price
  • Solar Aviation Light

    Solar Aviation Light

    Request for Price

    Solar aviation light is an ideal solution for passive shelters where the electricity connection as well as generator may not be there.

    ...more
    Get Best Price
  • cold storage monitoring

    cold storage monitoring

    Request for Price

    Cold Storage Monitoring available for other applications like Bank ATM, Hospitals, Hotels, BTS System, Hub Rooms, Cold Storage, Warehouse etc.

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Manufacturers
  • Secondary Business Type Exporters / Wholesale Suppliers
  • Year of Establishment 1998
  • No. of Employees 50 - 100
  • Annual Turnover Rs. 2.5 to 5 Crore Approx.

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Space Age Security Systems Ltd. Established in 1998 is Manufacturers of 48v dc aviation lamp, LED Based Aviation Obstruction Light, Led Aviation Light, Twin Aviation Obstruction Lights, Solar Aviation Light, cold storage monitoring, 4 Channel Dc Energy Meter, Fire Panel, battery bank voltage monitor, Fire Alarm Panel in Delhi.
Read More »

Contact Information

Space Age Security Systems Ltd.

  • Mr. Asif Ali Siddiqui
  • Ua-60, Jawahar Nagar Delhi, Kamla Nagar

Find Popular Power Distribution Unit Dealers in Delhi

top