Vetro Sol Borivali West, Mumbai, Maharashtra

We are offering vetro sol`s sparkle colour for glass:- this is solvent base sparkle colour for glass painting like air brushing and roller coating. This paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k sparkle colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these sparkle colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. It is made from high quality and durable pigments. This sparkle colours are most widely used and trusted by industry’s professional artist sparkle colour painted glass are widely use for wall paneling , column cladding, splashbacks ,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. it creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors. Installation of lacquered glass:- lacquered glass can only be used in interior applications comply with current national regulations. lacquered glass can be glazed - mechanically, either into glazing channels or trims, or with appropriate fixing screws. adhesively, using neutral translucent silicones or adhesives, or double-sided white adhesive pads. If in doubt of the compatibility of the adhesive, it isessential to test its reaction with the lacquer (and safety film backing if appropriate). We strongly recommend also using mechanical restraints, such as top and bottom j-channels, in conjunction with any adhesive glazing. Lacquered glass must not be fitted directly in front of nor behind a strong source of heat, e.g. A cooker hob. a safety film can be applied to the back of the lacquered glass. In the event of breakage, the glass remains adhered to the film, reducing the risk of injury. - install the product in front of an opaque surface, with the lacquered face towards the wall. - fix the lacquered glass to a supporting wall or surface that is true and flat, clean, dry and free of any aggressive agents. - place any of the light coloured lacquered glasses in front of a uniformly pale surface. - avoid locating the glass too close to intense sources of heat. If used near to a heater for example, the temperature of the wall must not exceed 45°c. In kitchens, do not allow the glass to come in to direct contact with flames or strong heat sources eg ovens, cooker hobs, very hot utensils or pans. - allow a gap of 1 - 2mm between the edges of two glass panels. - ensure that moisture is not allowed to collect behind the glass, either by allowing sufficient drainage and ventilation, or alternatively seal the perimeter with a suitable material. Maintenance:- clean regularly with a soft, clean cloth and a regular glass cleaning product. (neutral and non-abrasive). for safety • store container in upright position, with lid tightly closed, in a cool, dry place • keep out of reach of children and away from food, drink and animal feed • may be harmful if swallowed. In case of ingestion seek immediate medical attention. • ensure good ventilation at all times. • do not breathe vapour or spray. Avoid inhalation of dust by wearing suitable nose pad during sanding and surface preparation. • wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. • remove splashes from skin with soap and water or a recognised skin cleanser. • do not pour leftover paint down the drain or in water courses. • in the event of spills, contain spillage using sand or earth.

We are offering sparkel glass paint, sparkle glass colour. Vetro sol`s sparkle colour for glass:- this is solvent base sparkle colour for glass painting like air brushing and roller coating. This paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k sparkle colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these sparkle colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. It is made from high quality and durable pigments. This sparkle colours are most widely used and trusted by industry’s professional artist sparkle colour painted glass are widely use for wall paneling , column cladding, splashbacks ,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. it creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors. vetro sol`s metallic colour for glass:- this is solvent base metallic colour for glass painting like air brushing, roller coating .this paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k metallic colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these metallic colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. These metallic colours are most widely used and trusted by industry’s professional artist. It is made from high quality and durable pigments. using metallic colour on glass add not only depth but a brilliant color changing effect when exposed to certain light. as light gently washes over the mica particles in the metallic finish, a unique perception of depth is achieved. In addition, the mica particles create a striking effect as the appearance of the painted surface changes depending upon the lighting condition and viewing angle. Metallic colour painted glass are widely use for wall paneling, column cladding, splashbacks,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. It creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors. installation of lacquered glass:- lacquered glass can only be used in interior applications comply with current national regulations. lacquered glass can be glazed - mechanically, either into glazing channels or trims, or with appropriate fixing screws. adhesively, using neutral translucent silicones or adhesives, or double-sided white adhesive pads. If in doubt of the compatibility of the adhesive, it isessential to test its reaction with the lacquer (and safety film backing if appropriate). We strongly recommend also using mechanical restraints, such as top and bottom j-channels, in conjunction with any adhesive glazing. Lacquered glass must not be fitted directly in front of nor behind a strong source of heat, e.g. A cooker hob. a safety film can be applied to the back of the lacquered glass. In the event of breakage, the glass remains adhered to the film, reducing the risk of injury. - install the product in front of an opaque surface, with the lacquered face towards the wall. - fix the lacquered glass to a supporting wall or surface that is true and flat, clean, dry and free of any aggressive agents. - place any of the light coloured lacquered glasses in front of a uniformly pale surface. - avoid locating the glass too close to intense sources of heat. If used near to a heater for example, the temperature of the wall must not exceed 45°c. In kitchens, do not allow the glass to come in to direct contact with flames or strong heat sources eg ovens, cooker hobs, very hot utensils or pans. - allow a gap of 1 - 2mm between the edges of two glass panels. - ensure that moisture is not allowed to collect behind the glass, either by allowing sufficient drainage and ventilation, or alternatively seal the perimeter with a suitable material. Maintenance:- clean regularly with a soft, clean cloth and a regular glass cleaning product. (neutral and non-abrasive). for safety • store container in upright position, with lid tightly closed, in a cool, dry place • keep out of reach of children and away from food, drink and animal feed • may be harmful if swallowed. In case of ingestion seek immediate medical attention. • ensure good ventilation at all times. • do not breathe vapour or spray. Avoid inhalation of dust by wearing suitable nose pad during sanding and surface preparation. • wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. • remove splashes from skin with soap and water or a recognised skin cleanser. • do not pour leftover paint down the drain or in water courses. • in the event of spills, contain spillage using sand or earth.

We are offering vetro sol`s opaque colour for glass:- this is solvent base opaque colour (non transparent or back pain) for glass painting like air brushing and roller coating. This paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k opaque colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these opaque colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. It is made from high quality and durable pigments. These opaque colours are most widely used and trusted by industry’s professional artist. opaque colour painted glass are widely use for wall paneling , column cladding, splashbacks ,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. it creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors. installation of lacquered glass:- lacquered glass can only be used in interior applications comply with current national regulations. lacquered glass can be glazed - mechanically, either into glazing channels or trims, or with appropriate fixing screws. adhesively, using neutral translucent silicones or adhesives, or double-sided white adhesive pads. If in doubt of the compatibility of the adhesive, it isessential to test its reaction with the lacquer (and safety film backing if appropriate). We strongly recommend also using mechanical restraints, such as top and bottom j-channels, in conjunction with any adhesive glazing. Lacquered glass must not be fitted directly in front of nor behind a strong source of heat, e.g. A cooker hob. a safety film can be applied to the back of the lacquered glass. In the event of breakage, the glass remains adhered to the film, reducing the risk of injury. - install the product in front of an opaque surface, with the lacquered face towards the wall. - fix the lacquered glass to a supporting wall or surface that is true and flat, clean, dry and free of any aggressive agents. - place any of the light coloured lacquered glasses in front of a uniformly pale surface. - avoid locating the glass too close to intense sources of heat. If used near to a heater for example, the temperature of the wall must not exceed 45°c. In kitchens, do not allow the glass to come in to direct contact with flames or strong heat sources eg ovens, cooker hobs, very hot utensils or pans. - allow a gap of 1 - 2mm between the edges of two glass panels. - ensure that moisture is not allowed to collect behind the glass, either by allowing sufficient drainage and ventilation, or alternatively seal the perimeter with a suitable material. Maintenance:- clean regularly with a soft, clean cloth and a regular glass cleaning product. (neutral and non-abrasive). for safety • store container in upright position, with lid tightly closed, in a cool, dry place • keep out of reach of children and away from food, drink and animal feed • may be harmful if swallowed. In case of ingestion seek immediate medical attention. • ensure good ventilation at all times. • do not breathe vapour or spray. Avoid inhalation of dust by wearing suitable nose pad during sanding and surface preparation. • wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. • remove splashes from skin with soap and water or a recognised skin cleanser. • do not pour leftover paint down the drain or in water courses. • in the event of spills, contain spillage using sand or earth.

We are offering metallic glass colour, metallic spray paint for glass. Vetro sol`s metallic colour for glass:- this is solvent base metallic colour for glass painting like air brushing, roller coating .this paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k metallic colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these metallic colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. These metallic colours are most widely used and trusted by industry’s professional artist. It is made from high quality and durable pigments. using metallic colour on glass add not only depth but a brilliant color changing effect when exposed to certain light. as light gently washes over the mica particles in the metallic finish, a unique perception of depth is achieved. In addition, the mica particles create a striking effect as the appearance of the painted surface changes depending upon the lighting condition and viewing angle. metallic colour painted glass are widely use for wall paneling, column cladding, splashbacks,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. It creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors. vetro sol`s sparkle colour for glass:- this is solvent base sparkle colour for glass painting like air brushing and roller coating. This paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k sparkle colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these sparkle colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. It is made from high quality and durable pigments. This sparkle colours are most widely used and trusted by industry’s professional artist sparkle colour painted glass are widely use for wall paneling , column cladding, splashbacks ,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. it creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors. vetro sol`s opaque colour for glass:- this is solvent base opaque colour (non transparent or back pain) for glass painting like air brushing and roller coating. This paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k opaque colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these opaque colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. It is made from high quality and durable pigments. These opaque colours are most widely used and trusted by industry’s professional artist. opaque colour painted glass are widely use for wall paneling , column cladding, splashbacks ,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. it creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors. installation of lacquered glass:- lacquered glass can only be used in interior applications comply with current national regulations. lacquered glass can be glazed - mechanically, either into glazing channels or trims, or with appropriate fixing screws. adhesively, using neutral translucent silicones or adhesives, or double-sided white adhesive pads. If in doubt of the compatibility of the adhesive, it isessential to test its reaction with the lacquer (and safety film backing if appropriate). We strongly recommend also using mechanical restraints, such as top and bottom j-channels, in conjunction with any adhesive glazing. Lacquered glass must not be fitted directly in front of nor behind a strong source of heat, e.g. A cooker hob. a safety film can be applied to the back of the lacquered glass. In the event of breakage, the glass remains adhered to the film, reducing the risk of injury. - install the product in front of an opaque surface, with the lacquered face towards the wall. - fix the lacquered glass to a supporting wall or surface that is true and flat, clean, dry and free of any aggressive agents. - place any of the light coloured lacquered glasses in front of a uniformly pale surface. - avoid locating the glass too close to intense sources of heat. If used near to a heater for example, the temperature of the wall must not exceed 45°c. in kitchens, do not allow the glass to come in to direct contact with flames or strong heat sources eg ovens, cooker hobs, very hot utensils or pans. - allow a gap of 1 - 2mm between the edges of two glass panels. - ensure that moisture is not allowed to collect behind the glass, either by allowing sufficient drainage and ventilation, or alternatively seal the perimeter with a suitable material. maintenance:- clean regularly with a soft, clean cloth and a regular glass cleaning product. (neutral and non-abrasive). vetro sol`s air brushing colour for glass:- this is solvent base transparent colour for glass painting like air brushing. This airbrush colors are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in both liquid form and powder form both type available at vetro sol. This is most widely used and trusted by industry`s professional airbrush artist. It is made from high quality and durable pigments. It is available in ½ liter and 1 liter and 5 liter packing. Clear lacquer is also available for use as a topcoat, when added durability is required. transparent glass colours are used in a variety of crafts, and fantastic effects can be achieved with the fine detailing of an airbrush. Airbrushing is a handy skill that can transform a simple project into a work of art, and lacquer-based translucent glass paints are ideal for windows, doors, partitions, ceiling, stairs, wall paneling use in home, offices, hospitals, banks, stadium, mall, theaters hotels etc. for safety • store container in upright position, with lid tightly closed, in a cool, dry place • keep out of reach of children and away from food, drink and animal feed • may be harmful if swallowed. In case of ingestion seek immediate medical attention. • ensure good ventilation at all times. • do not breathe vapour or spray. Avoid inhalation of dust by wearing suitable nose pad during sanding and surface preparation. • wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. • remove splashes from skin with soap and water or a recognised skin cleanser. • do not pour leftover paint down the drain or in water courses. • in the event of spills, contain spillage using sand or earth.

We are offering Glass Colour or Glass Paint Lacquered Glass Colours. Vetro sol is well known enterprise as solution provider for glass processing industry. We are specialist in providing raw material for making value added product like stain glass, back painted glass that is call lacquered glass, metallic colours , sparkle colours, air brushing colours for glass and many other types of products. Our product is the first choice for the processors who want to make quality products for their valuable clients. We are always working towards introducing new glass technology, research and development, technology training, manufacturing, and selling of raw materials. we believe in moving together with our customers on path leading towards a prosperous future. Besides our regular quality control exercise, we also have r&d team who are constantly working on upgrading the quality of our products and developing new ones too. At vetro sol we strongly believe in delivering quality products to our customers; we believe in moving together with our customers on path leading towards a prosperous future. Our marketing & technical staff is always available to provide you after sales service. Also we are concerned that through our products & knowledge our customer’s profitability should increase. Vetro sol glass paint is scientifically formulated with a unique glass surface molecular altering chemical complex (nanotechnology) along with various high performance alkyds, uv protective compounds, and other premium components designed for optimum glass surface color coating. This chemical combination ensures a true self priming permanent paint/glass bond, along with great color retention, durability, and installation adhesive compatibility. Technically, vetro sol glass colours can be applied to any glass type whether it is heat resistant, laminated, safety, toughened or specialty glass with raised patterns shapes or styles. Vetro sol offers an almost limitless scope of effects and finishes to an array of glass types creating a world of new and exciting applications. Our colours works great for coating all types of glass and coats well on flat, curved, or 3-dimensional surfaces. Can be sprayed or airbrushed with ease. Some fine airbrushing applications may require slight thinning. • excellent uv stability & protection from yellowing. • excellent durablity from cracking or peeling. • colors are rich concentrated colors providing deep vibrant color shades. back painted glass is a difficult glass product to acquire, especially in the india. Only a small group of glass companies offer back painted glass, not to mention most of these companies do not supply you with excellent bonded color coating like vetro sol glass paint. High priced shipping charges, undependable small company turnaround, high prices per square foot and quality control of back painted glass also make it an extremely difficult product to work with. At vetro sol, we offer you the ability to purchase and easily back paint glass yourself whether you are a large glass fabricator, a small in house glass installer, or a hands on do-it your self type! when using vetro sol glass paint, it isn’t difficult to achieve professional grade back painted glass. installation of lacquered glass:- lacquered glass can only be used in interior applications comply with current national regulations. lacquered glass can be glazed - mechanically, either into glazing channels or trims, or with appropriate fixing screws. adhesively, using neutral translucent silicones or adhesives, or double-sided white adhesive pads. If in doubt of the compatibility of the adhesive, it isessential to test its reaction with the lacquer (and safety film backing if appropriate). We strongly recommend also using mechanical restraints, such as top and bottom j-channels, in conjunction with any adhesive glazing. Lacquered glass must not be fitted directly in front of nor behind a strong source of heat, e.g. A cooker hob. a safety film can be applied to the back of the lacquered glass. In the event of breakage, the glass remains adhered to the film, reducing the risk of injury. - install the product in front of an opaque surface, with the lacquered face towards the wall. - fix the lacquered glass to a supporting wall or surface that is true and flat, clean, dry and free of any aggressive agents. - place any of the light coloured lacquered glasses in front of a uniformly pale surface. - avoid locating the glass too close to intense sources of heat. If used near to a heater for example, the temperature of the wall must not exceed 45°c. In kitchens, do not allow the glass to come in to direct contact with flames or strong heat sources eg ovens, cooker hobs, very hot utensils or pans. - allow a gap of 1 - 2mm between the edges of two glass panels. - ensure that moisture is not allowed to collect behind the glass, either by allowing sufficient drainage and ventilation, or alternatively seal the perimeter with a suitable material. Maintenance:- clean regularly with a soft, clean cloth and a regular glass cleaning product. (neutral and non-abrasive).

We are offering back paint for glass or lacquer paint for glass. vetro sol`s metallic colour for glass:- this is solvent base metallic colour for glass painting like air brushing, roller coating .this paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k metallic colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these metallic colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. These metallic colours are most widely used and trusted by industry’s professional artist. It is made from high quality and durable pigments. using metallic colour on glass add not only depth but a brilliant color changing effect when exposed to certain light. as light gently washes over the mica particles in the metallic finish, a unique perception of depth is achieved. In addition, the mica particles create a striking effect as the appearance of the painted surface changes depending upon the lighting condition and viewing angle. metallic colour painted glass are widely use for wall paneling, column cladding, splashbacks,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. It creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors. vetro sol`s sparkle colour for glass:- this is solvent base sparkle colour for glass painting like air brushing and roller coating. This paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k sparkle colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these sparkle colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. It is made from high quality and durable pigments. This sparkle colours are most widely used and trusted by industry’s professional artist sparkle colour painted glass are widely use for wall paneling , column cladding, splashbacks ,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. it creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors. vetro sol`s opaque colour for glass:- this is solvent base opaque colour (non transparent or back pain) for glass painting like air brushing and roller coating. This paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k opaque colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these opaque colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. It is made from high quality and durable pigments. These opaque colours are most widely used and trusted by industry’s professional artist. opaque colour painted glass are widely use for wall paneling , column cladding, splashbacks ,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. it creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors. installation of lacquered glass:- lacquered glass can only be used in interior applications comply with current national regulations. lacquered glass can be glazed - mechanically, either into glazing channels or trims, or with appropriate fixing screws. adhesively, using neutral translucent silicones or adhesives, or double-sided white adhesive pads. If in doubt of the compatibility of the adhesive, it isessential to test its reaction with the lacquer (and safety film backing if appropriate). We strongly recommend also using mechanical restraints, such as top and bottom j-channels, in conjunction with any adhesive glazing. Lacquered glass must not be fitted directly in front of nor behind a strong source of heat, e.g. A cooker hob. a safety film can be applied to the back of the lacquered glass. In the event of breakage, the glass remains adhered to the film, reducing the risk of injury. - install the product in front of an opaque surface, with the lacquered face towards the wall. - fix the lacquered glass to a supporting wall or surface that is true and flat, clean, dry and free of any aggressive agents. - place any of the light coloured lacquered glasses in front of a uniformly pale surface. - avoid locating the glass too close to intense sources of heat. If used near to a heater for example, the temperature of the wall must not exceed 45°c. in kitchens, do not allow the glass to come in to direct contact with flames or strong heat sources eg ovens, cooker hobs, very hot utensils or pans. - allow a gap of 1 - 2mm between the edges of two glass panels. - ensure that moisture is not allowed to collect behind the glass, either by allowing sufficient drainage and ventilation, or alternatively seal the perimeter with a suitable material. maintenance:- clean regularly with a soft, clean cloth and a regular glass cleaning product. (neutral and non-abrasive). vetro sol`s air brushing colour for glass:- this is solvent base transparent colour for glass painting like air brushing. This airbrush colors are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in both liquid form and powder form both type available at vetro sol. This is most widely used and trusted by industry`s professional airbrush artist. It is made from high quality and durable pigments. It is available in ½ liter and 1 liter and 5 liter packing. Clear lacquer is also available for use as a topcoat, when added durability is required. transparent glass colours are used in a variety of crafts, and fantastic effects can be achieved with the fine detailing of an airbrush. Airbrushing is a handy skill that can transform a simple project into a work of art, and lacquer-based translucent glass paints are ideal for windows, doors, partitions, ceiling, stairs, wall paneling use in home, offices, hospitals, banks, stadium, mall, theaters hotels etc. for safety • store container in upright position, with lid tightly closed, in a cool, dry place • keep out of reach of children and away from food, drink and animal feed • may be harmful if swallowed. In case of ingestion seek immediate medical attention. • ensure good ventilation at all times. • do not breathe vapour or spray. Avoid inhalation of dust by wearing suitable nose pad during sanding and surface preparation. • wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. • remove splashes from skin with soap and water or a recognised skin cleanser. • do not pour leftover paint down the drain or in water courses. • in the event of spills, contain spillage using sand or earth.

We offer this is solvent base metallic colour for glass painting like air brushing, roller coating .this paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k metallic colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these metallic colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. These metallic colours are most widely used and trusted by industry’s professional artist. It is made from high quality and durable pigments. using metallic colour on glass add not only depth but a brilliant color changing effect when exposed to certain light. as light gently washes over the mica particles in the metallic finish, a unique perception of depth is achieved. In addition, the mica particles create a striking effect as the appearance of the painted surface changes depending upon the lighting condition and viewing angle. metallic colour painted glass are widely use for wall paneling, column cladding, splashbacks,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. It creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors. vetro sol`s sparkle colour for glass:- this is solvent base sparkle colour for glass painting like air brushing and roller coating. This paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k sparkle colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these sparkle colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. It is made from high quality and durable pigments. This sparkle colours are most widely used and trusted by industry’s professional artist sparkle colour painted glass are widely use for wall paneling , column cladding, splashbacks ,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. it creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors.

We are offering sprakle colour for glass or colour for making lacquered glass. This is solvent base sparkle colour for glass painting like air brushing and roller coating. This paint is made in 2 pack pu base system. This coatings offer outstanding hardness, mar and scratch resistance, superior exterior durability and fast rates of cure. In addition, vetro sol 2k sparkle colors are available in a wide array of standard colors, and can be pigmented to meet your custom color requirements. these sparkle colours are engineered to meet the highest standards of professionals, for use in airbrushing glass. Various colour shades available in this series. These colours are available in liquid form. It is made from high quality and durable pigments. This sparkle colours are most widely used and trusted by industry’s professional artist sparkle colour painted glass are widely use for wall paneling , column cladding, splashbacks ,as privacy glass in bathrooms, as durable and aesthetic cladding glass for walls and doors. Furniture – ideal for use on wardrobes and cupboards, interior doors, decorative glass in reception areas, writing boards, table tops, it brings colour and ambience to interiors and is particularly suitable for more demanding locations, such as bathrooms and kitchens. In homes, offices, hotels, shops and museums. it creates smooth, homogenous surfaces as wall-paneling, in furniture and in wardrobe and cupboard doors. installation of lacquered glass:- lacquered glass can only be used in interior applications comply with current national regulations. lacquered glass can be glazed - mechanically, either into glazing channels or trims, or with appropriate fixing screws. adhesively, using neutral translucent silicones or adhesives, or double-sided white adhesive pads. If in doubt of the compatibility of the adhesive, it isessential to test its reaction with the lacquer (and safety film backing if appropriate). We strongly recommend also using mechanical restraints, such as top and bottom j-channels, in conjunction with any adhesive glazing. Lacquered glass must not be fitted directly in front of nor behind a strong source of heat, e.g. A cooker hob. a safety film can be applied to the back of the lacquered glass. In the event of breakage, the glass remains adhered to the film, reducing the risk of injury. - install the product in front of an opaque surface, with the lacquered face towards the wall. - fix the lacquered glass to a supporting wall or surface that is true and flat, clean, dry and free of any aggressive agents. - place any of the light coloured lacquered glasses in front of a uniformly pale surface. - avoid locating the glass too close to intense sources of heat. If used near to a heater for example, the temperature of the wall must not exceed 45°c. in kitchens, do not allow the glass to come in to direct contact with flames or strong heat sources eg ovens, cooker hobs, very hot utensils or pans. - allow a gap of 1 - 2mm between the edges of two glass panels. - ensure that moisture is not allowed to collect behind the glass, either by allowing sufficient drainage and ventilation, or alternatively seal the perimeter with a suitable material. maintenance:- clean regularly with a soft, clean cloth and a regular glass cleaning product. (neutral and non-abrasive).